You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
260 lines
12 KiB
260 lines
12 KiB
# This file is the configuration of redis-shake.
|
|
|
|
# If you have any problem, please visit: https://github.com/alibaba/RedisShake/wiki/FAQ
|
|
# 有疑问请先查阅：https://github.com/alibaba/RedisShake/wiki/FAQ
|
|
|
|
# current configuration version, do not modify.
|
|
# 当前配置文件的版本号，请不要修改该值。
|
|
conf.version = 1
|
|
|
|
# id
|
|
id = redis-shake
|
|
|
|
# The log file name, if left blank, it will be printed to stdout,
|
|
# otherwise it will be printed to the specified file.
|
|
# 日志文件名，留空则会打印到 stdout，否则打印到指定文件。
|
|
# for example:
|
|
# log.file =
|
|
# log.file = /var/log/redis-shake.log
|
|
log.file =
|
|
|
|
# log level: "none", "error", "warn", "info", "debug".
|
|
# default is "info".
|
|
# 日志等级，可选：none error warn info debug
|
|
# 默认为：info
|
|
log.level = info
|
|
|
|
# 进程文件存储目录，留空则会输出到当前目录,
|
|
# 注意这个是目录，真正生成的 pid 是 {pid_path}/{id}.pid
|
|
# 例如：
|
|
# pid_path = ./
|
|
# pid_path = /var/run/
|
|
pid_path =
|
|
|
|
# pprof port.
|
|
system_profile = 9310
|
|
|
|
# restful port, set -1 means disable, in `restore` mode RedisShake will exit once finish restoring RDB only if this value
|
|
# is -1, otherwise, it'll wait forever.
|
|
# restful port, 查看 metric 端口, -1 表示不启用. 如果是`restore`模式，只有设置为-1才会在完成RDB恢复后退出，否则会一直block。
|
|
# http://127.0.0.1:9320/conf 查看 redis-shake 使用的配置
|
|
# http://127.0.0.1:9320/metric 查看 redis-shake 的同步情况
|
|
http_profile = 9320
|
|
|
|
# parallel routines number used in RDB file syncing. default is 64.
|
|
# 启动多少个并发线程同步一个RDB文件。
|
|
parallel = 32
|
|
|
|
# source redis configuration.
|
|
# used in `dump`, `sync` and `rump`.
|
|
# source redis type, e.g. "standalone" (default), "sentinel" or "cluster".
|
|
# 1. "standalone": standalone db mode.
|
|
# 2. "sentinel": the redis address is read from sentinel.
|
|
# 3. "cluster": the source redis has several db.
|
|
# 4. "proxy": the proxy address, currently, only used in "rump" mode.
|
|
# used in `dump`, `sync` and `rump`.
|
|
# 源端 Redis 的类型，可选：standalone sentinel cluster proxy
|
|
# 注意：proxy 只用于 rump 模式。
|
|
source.type = standalone
|
|
|
|
# ip:port
|
|
# the source address can be the following:
|
|
# 1. single db address. for "standalone" type.
|
|
# 2. ${sentinel_master_name}:${master or slave}@sentinel single/cluster address, e.g., mymaster:master@127.0.0.1:26379;127.0.0.1:26380, or @127.0.0.1:26379;127.0.0.1:26380. for "sentinel" type.
|
|
# 3. cluster that has several db nodes split by semicolon(;). for "cluster" type. e.g., 10.1.1.1:20331;10.1.1.2:20441.
|
|
# 4. proxy address(used in "rump" mode only). for "proxy" type.
|
|
# 源redis地址。对于sentinel或者开源cluster模式，输入格式为"master名字:拉取角色为master或者slave@sentinel的地址"，别的cluster
|
|
# 架构，比如codis, twemproxy, aliyun proxy等需要配置所有master或者slave的db地址。
|
|
# 源端 redis 的地址
|
|
# 1. standalone 模式配置 ip:port, 例如: 10.1.1.1:20331
|
|
# 2. cluster 模式需要配置所有 nodes 的 ip:port, 例如: source.address = 10.1.1.1:20331;10.1.1.2:20441
|
|
source.address = 127.0.0.1:20441
|
|
|
|
# source password, left blank means no password.
|
|
# 源端密码，留空表示无密码。
|
|
source.password_raw =
|
|
|
|
# auth type, don't modify it
|
|
source.auth_type = auth
|
|
# tls enable, true or false. Currently, only support standalone.
|
|
# open source redis does NOT support tls so far, but some cloud versions do.
|
|
source.tls_enable = false
|
|
# input RDB file.
|
|
# used in `decode` and `restore`.
|
|
# if the input is list split by semicolon(;), redis-shake will restore the list one by one.
|
|
# 如果是decode或者restore，这个参数表示读取的rdb文件。支持输入列表，例如：rdb.0;rdb.1;rdb.2
|
|
# redis-shake将会挨个进行恢复。
|
|
source.rdb.input =
|
|
# the concurrence of RDB syncing, default is len(source.address) or len(source.rdb.input).
|
|
# used in `dump`, `sync` and `restore`. 0 means default.
|
|
# This is useless when source.type isn't cluster or only input is only one RDB.
|
|
# 拉取的并发度，如果是`dump`或者`sync`，默认是source.address中db的个数，`restore`模式默认len(source.rdb.input)。
|
|
# 假如db节点/输入的rdb有5个，但rdb.parallel=3，那么一次只会
|
|
# 并发拉取3个db的全量数据，直到某个db的rdb拉取完毕并进入增量，才会拉取第4个db节点的rdb，
|
|
# 以此类推，最后会有len(source.address)或者len(rdb.input)个增量线程同时存在。
|
|
source.rdb.parallel = 0
|
|
# for special cloud vendor: ucloud
|
|
# used in `decode` and `restore`.
|
|
# ucloud集群版的rdb文件添加了slot前缀，进行特判剥离: ucloud_cluster。
|
|
source.rdb.special_cloud =
|
|
|
|
# target redis configuration. used in `restore`, `sync` and `rump`.
|
|
# the type of target redis can be "standalone", "proxy" or "cluster".
|
|
# 1. "standalone": standalone db mode.
|
|
# 2. "sentinel": the redis address is read from sentinel.
|
|
# 3. "cluster": open source cluster (not supported currently).
|
|
# 4. "proxy": proxy layer ahead redis. Data will be inserted in a round-robin way if more than 1 proxy given.
|
|
# 目的redis的类型，支持standalone，sentinel，cluster和proxy四种模式。
|
|
target.type = standalone
|
|
# ip:port
|
|
# the target address can be the following:
|
|
# 1. single db address. for "standalone" type.
|
|
# 2. ${sentinel_master_name}:${master or slave}@sentinel single/cluster address, e.g., mymaster:master@127.0.0.1:26379;127.0.0.1:26380, or @127.0.0.1:26379;127.0.0.1:26380. for "sentinel" type.
|
|
# 3. cluster that has several db nodes split by semicolon(;). for "cluster" type.
|
|
# 4. proxy address. for "proxy" type.
|
|
target.address = 127.0.0.1:6379
|
|
|
|
# target password, left blank means no password.
|
|
# 目的端密码，留空表示无密码。
|
|
target.password_raw =
|
|
|
|
# auth type, don't modify it
|
|
target.auth_type = auth
|
|
# all the data will be written into this db. < 0 means disable.
|
|
target.db = -1
|
|
|
|
# Format: 0-5;1-3 ,Indicates that the data of the source db0 is written to the target db5, and
|
|
# the data of the source db1 is all written to the target db3.
|
|
# Note: When target.db is specified, target.dbmap will not take effect.
|
|
# 例如 0-5;1-3 表示源端 db0 的数据会被写入目的端 db5, 源端 db1 的数据会被写入目的端 db3
|
|
# 当 target.db 开启的时候 target.dbmap 不会生效.
|
|
target.dbmap =
|
|
|
|
# tls enable, true or false. Currently, only support standalone.
|
|
# open source redis does NOT support tls so far, but some cloud versions do.
|
|
target.tls_enable = false
|
|
# output RDB file prefix.
|
|
# used in `decode` and `dump`.
|
|
# 如果是decode或者dump，这个参数表示输出的rdb前缀，比如输入有3个db，那么dump分别是:
|
|
# ${output_rdb}.0, ${output_rdb}.1, ${output_rdb}.2
|
|
target.rdb.output = local_dump
|
|
# some redis proxy like twemproxy doesn't support to fetch version, so please set it here.
|
|
# e.g., target.version = 4.0
|
|
target.version =
|
|
|
|
# use for expire key, set the time gap when source and target timestamp are not the same.
|
|
# 用于处理过期的键值，当迁移两端不一致的时候，目的端需要加上这个值
|
|
fake_time =
|
|
|
|
# how to solve when destination restore has the same key.
|
|
# rewrite: overwrite.
|
|
# none: panic directly.
|
|
# ignore: skip this key. not used in rump mode.
|
|
# used in `restore`, `sync` and `rump`.
|
|
# 当源目的有重复 key 时是否进行覆写, 可选值:
|
|
# 1. rewrite: 源端覆盖目的端
|
|
# 2. none: 一旦发生进程直接退出
|
|
# 3. ignore: 保留目的端key，忽略源端的同步 key. 该值在 rump 模式下不会生效.
|
|
key_exists = none
|
|
|
|
# filter db, key, slot, lua.
|
|
# filter db.
|
|
# used in `restore`, `sync` and `rump`.
|
|
# e.g., "0;5;10" means match db0, db5 and db10.
|
|
# at most one of `filter.db.whitelist` and `filter.db.blacklist` parameters can be given.
|
|
# if the filter.db.whitelist is not empty, the given db list will be passed while others filtered.
|
|
# if the filter.db.blacklist is not empty, the given db list will be filtered while others passed.
|
|
# all dbs will be passed if no condition given.
|
|
# 指定的db被通过，比如0;5;10将会使db0, db5, db10通过, 其他的被过滤
|
|
filter.db.whitelist =
|
|
# 指定的db被过滤，比如0;5;10将会使db0, db5, db10过滤，其他的被通过
|
|
filter.db.blacklist =
|
|
# filter key with prefix string. multiple keys are separated by ';'.
|
|
# e.g., "abc;bzz" match let "abc", "abc1", "abcxxx", "bzz" and "bzzwww".
|
|
# used in `restore`, `sync` and `rump`.
|
|
# at most one of `filter.key.whitelist` and `filter.key.blacklist` parameters can be given.
|
|
# if the filter.key.whitelist is not empty, the given keys will be passed while others filtered.
|
|
# if the filter.key.blacklist is not empty, the given keys will be filtered while others passed.
|
|
# all the namespace will be passed if no condition given.
|
|
# 支持按前缀过滤key，只让指定前缀的key通过，分号分隔。比如指定abc，将会通过abc, abc1, abcxxx
|
|
filter.key.whitelist =
|
|
# 支持按前缀过滤key，不让指定前缀的key通过，分号分隔。比如指定abc，将会阻塞abc, abc1, abcxxx
|
|
filter.key.blacklist =
|
|
# filter given slot, multiple slots are separated by ';'.
|
|
# e.g., 1;2;3
|
|
# used in `sync`.
|
|
# 指定过滤slot，只让指定的slot通过
|
|
filter.slot =
|
|
# filter lua script. true means not pass. However, in redis 5.0, the lua
|
|
# converts to transaction(multi+{commands}+exec) which will be passed.
|
|
# 控制不让lua脚本通过，true表示不通过
|
|
filter.lua = false
|
|
|
|
# big key threshold, the default is 500 * 1024 * 1024 bytes. If the value is bigger than
|
|
# this given value, all the field will be spilt and write into the target in order. If
|
|
# the target Redis type is Codis, this should be set to 1, please checkout FAQ to find
|
|
# the reason.
|
|
# 正常key如果不大，那么都是直接调用restore写入到目的端，如果key对应的value字节超过了给定
|
|
# 的值，那么会分批依次一个一个写入。如果目的端是Codis，这个需要置为1，具体原因请查看FAQ。
|
|
# 如果目的端大版本小于源端，也建议设置为1。
|
|
big_key_threshold = 524288000
|
|
|
|
# enable metric
|
|
# used in `sync`.
|
|
# 是否启用metric
|
|
metric = true
|
|
# print in log
|
|
# 是否将metric打印到log中
|
|
metric.print_log = false
|
|
|
|
# sender information.
|
|
# sender flush buffer size of byte.
|
|
# used in `sync`.
|
|
# 发送缓存的字节长度，超过这个阈值将会强行刷缓存发送
|
|
sender.size = 104857600
|
|
# sender flush buffer size of oplog number.
|
|
# used in `sync`. flush sender buffer when bigger than this threshold.
|
|
# 发送缓存的报文个数，超过这个阈值将会强行刷缓存发送，对于目的端是cluster的情况，这个值
|
|
# 的调大将会占用部分内存。
|
|
sender.count = 4095
|
|
# delay channel size. once one oplog is sent to target redis, the oplog id and timestamp will also
|
|
# stored in this delay queue. this timestamp will be used to calculate the time delay when receiving
|
|
# ack from target redis.
|
|
# used in `sync`.
|
|
# 用于metric统计时延的队列
|
|
sender.delay_channel_size = 65535
|
|
|
|
# enable keep_alive option in TCP when connecting redis.
|
|
# the unit is second.
|
|
# 0 means disable.
|
|
# TCP keep-alive保活参数，单位秒，0表示不启用。
|
|
keep_alive = 0
|
|
|
|
# used in `rump`.
|
|
# number of keys captured each time. default is 100.
|
|
# 每次scan的个数，不配置则默认100.
|
|
scan.key_number = 50
|
|
# used in `rump`.
|
|
# we support some special redis types that don't use default `scan` command like alibaba cloud and tencent cloud.
|
|
# 有些版本具有特殊的格式，与普通的scan命令有所不同，我们进行了特殊的适配。目前支持腾讯云的集群版"tencent_cluster"
|
|
# 和阿里云的集群版"aliyun_cluster"，注释主从版不需要配置，只针对集群版。
|
|
scan.special_cloud =
|
|
# used in `rump`.
|
|
# we support to fetching data from given file which marks the key list.
|
|
# 有些云版本，既不支持sync/psync，也不支持scan，我们支持从文件中进行读取所有key列表并进行抓取：一行一个key。
|
|
scan.key_file =
|
|
|
|
# limit the rate of transmission. Only used in `rump` currently.
|
|
# e.g., qps = 1000 means pass 1000 keys per second. default is 500,000(0 means default)
|
|
qps = 200000
|
|
|
|
# enable resume from break point, please visit xxx to see more details.
|
|
# 断点续传开关
|
|
resume_from_break_point = false
|
|
|
|
# ----------------splitter----------------
|
|
# below variables are useless for current open source version so don't set.
|
|
|
|
# replace hash tag.
|
|
# used in `sync`.
|
|
replace_hash_tag = false
|
|
|