RedisShake/conf/redis-shake.conf

# this is the configuration of redis-shake.
# if you have any problem, please visit https://github.com/alibaba/RedisShake/wiki/FAQ

# id
id = redis-shake

# log file，日志文件，不配置将打印到stdout (e.g. /var/log/redis-shake.log )
log.file =
# log level: "none", "error", "warn", "info", "all". default is "info".
log.level = info
# pid path，进程文件存储地址（e.g. /var/run/)，不配置将默认输出到执行下面,
# 注意这个是目录，真正的pid是`{pid_path}/{id}.pid`
pid_path = 

# pprof port
system_profile = 9310
# restful port，查看metric端口
http_profile = 9320

# runtime.GOMAXPROCS, 0 means use cpu core number: runtime.NumCPU()
ncpu = 0

# parallel routines number used in RDB file syncing. default is 64.
parallel = 32

# input RDB file. read from stdin, default is stdin ('/dev/stdin').
# used in `decode` and `restore`.
# 如果是decode或者restore，这个参数表示读取的rdb文件
input_rdb = local

# output RDB file prefix.
# used in `decode` and `dump`.
# 如果是decode或者dump，这个参数表示输出的rdb前缀，比如输入有3个db，那么dump分别是:
# ${output_rdb}.0, ${output_rdb}.1, ${output_rdb}.2
output_rdb = local_dump

# source redis configuration.
# used in `dump`, `sync` and `rump`.
# ip:port
# the source address can be redis db or cluster that has several db nodes split by semicolon(;).
# if the type is `rump`, source type can also be the proxy address.
# 源redis地址(ip:port)，源端支持开源cluster以及db节点暴露且有权限的proxy集群模式，不同db以分号(;)
# 分割，例如：ip1:port1;ip2;port2;ip3;port3。
source.address = 127.0.0.1:20441
# password.
source.password_raw = 123456
# auth type, don't modify it
source.auth_type = auth
# the concurrence of fetching data, default is len(source.address)
# used in `dump` and `sync`.
# 拉取的并发度，默认是source.address中db的个数。假如db节点有5个，但source.parallel=3，那么一次只会
# 并发拉取3个db的全量数据，直到某个db的rdb拉取完毕，才会拉取第4个db节点的rdb，以此类推。
source.parallel =

# target redis configuration. used in `restore` and `sync`.
# used in `restore`, `sync` and `rump`.
# ip:port
# the source address can be cluster that has several db nodes split by semicolon(;).
# 目的redis地址(ip:port)，目的端支持开源的cluster架构和proxy模式，不同db以分号(;)分割，例如：
# ip1:port1;ip2;port2;ip3;port3。
target.address = 127.0.0.1:20551
# password.
target.password_raw = 123456
# auth type, don't modify it
target.auth_type = auth
# all the data will be written into this db. < 0 means disable.
target.db = -1
# the type of target redis: `cluster`, `opensource`. If the target is open source redis cluster,
# redis-shake uses redis-go-cluster driver to write data, otherwise, redigo driver is used to
# insert data in round robin way.
# 目的redis的类型：`opensource`和`proxy`. `opensource`表示是开源的cluster或者redis db节点；
# `proxy`表示是proxy类型，将会以round robin循环方式写入。对于开源的cluster用redis-go-cluster驱动写入，其余
# 的则用redigo写入
# target.type = opensource

# use for expire key, set the time gap when source and target timestamp are not the same.
# 用于处理过期的键值，当迁移两端不一致的时候，目的端需要加上这个值
fake_time =

# force rewrite when destination restore has the key
# used in `restore`, `sync` and `rump`.
# 当源目的有重复key，是否进行覆写
rewrite = true

# filter db or key or slot
# choose these db, e.g., 5, only choose db5. defalut is all.
# used in `restore` and `sync`.
# 支持过滤db，只让指定的db通过
filter.db =
# filter key with prefix string. multiple keys are separated by ';'.
# e.g., a;b;c
# default is all.
# used in `restore` and `sync`.
# 支持过滤key，只让指定的key通过，分号分隔
filter.key =
# filter given slot, multiple slots are separated by ';'.
# e.g., 1;2;3
# used in `sync`.
# 指定过滤slot，只让指定的slot通过
filter.slot =

# big key threshold, the default is 500 * 1024 * 1024 bytes. If the value is bigger than
# this given value, all the field will be spilt and write into the target in order.
# 正常key如果不大，那么都是直接调用restore写入到目的端，如果key对应的value字节超过了给定
# 的值，那么会分批依次一个一个写入。
big_key_threshold = 524288000

# use psync command.
# used in `sync`.
# 默认使用sync命令，启用将会使用psync命令
psync = false

# enable metric
# used in `sync`.
# 是否启用metric
metric = true
# print in log
# 是否将metric打印到log中
metric.print_log = false

# heartbeat
# send heartbeat to this url
# used in `sync`.
# 心跳的url地址，redis-shake将会发送到这个地址
#heartbeat.url = http://127.0.0.1:8000
heartbeat.url =
# interval by seconds
# 心跳保活周期
heartbeat.interval = 3
# external info which will be included in heartbeat data.
# 在心跳报文中添加额外的信息
heartbeat.external = test external
# local network card to get ip address, e.g., "lo", "eth0", "en0"
# 获取ip的网卡
heartbeat.network_interface =

# sender information.
# sender flush buffer size of byte.
# used in `sync`.
# 发送缓存的字节长度，超过这个阈值将会强行刷缓存发送
sender.size = 104857600
# sender flush buffer size of oplog number.
# used in `sync`.
# 发送缓存的报文个数，超过这个阈值将会强行刷缓存发送
sender.count = 5000
# delay channel size. once one oplog is sent to target redis, the oplog id and timestamp will also
# stored in this delay queue. this timestamp will be used to calculate the time delay when receiving
# ack from target redis.
# used in `sync`.
# 用于metric统计时延的队列
sender.delay_channel_size = 65535

# enable keep_alive option in TCP when connecting redis.
# the unit is second.
# 0 means disable.
# TCP keep-alive保活参数，单位秒，0表示不启用。
keep_alive = 0

# used in `rump`.
# number of keys captured each time. default is 100.
# 每次scan的个数，不配置则默认100.
scan.key_number = 50

# used in `rump`.
# we support some special redis types that don't use default `scan` command like alibaba cloud and tencent cloud.
# 有些版本具有特殊的格式，与普通的scan命令有所不同，我们进行了特殊的适配。目前支持腾讯云的集群版"tencent_cluster"
# 和阿里云的集群版"aliyun_cluster"。
scan.special_cloud =

# used in `rump`.
# we support to fetching data from given file which marks the key list.
# 有些云版本，既不支持sync/psync，也不支持scan，我们支持从文件中进行读取所有key列表并进行抓取：一行一个key。
scan.key_file =

# ----------------splitter----------------
# below variables are useless for current open source version so don't set.

# replace hash tag.
# used in `sync`.
replace_hash_tag = false

# used in `restore` and `dump`.
extra = false